Understanding printer menus
Menu item
Offset Pages
None
Between Copies
Between Jobs
Quality menu
Menu item
Print Resolution
600 dpi
1200 dpi
1200 Image Q
2400 Image Q
300 dpi
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both directions
Isolated
Toner Darkness
1–10
Enhance Fine Lines
Off
On
Description
Offsets pages at certain instances
Notes:
•
None is the factory default setting.
•
Between Copies offsets each copy of a print job if Collate is set to On. If Collate
is set to Off, each set of printed pages are offset, such as all page 1's and all
page 2's.
•
Between Jobs sets the same offset position for the entire print job regardless
of the number of copies printed.
•
This menu item only appears if a stapler option is installed.
Description
Specifies the printed output resolution
Adjusts pixels to print a sharper image.
Note: Off is the factory default setting.
Lightens or darkens the print
Notes:
•
8 is the factory default setting.
•
Selecting a smaller number can help conserve toner.
Enables a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts
Notes:
•
Off is the factory default setting.
•
You can set this option from the software program. For Windows users, click
File > Print, and then click Properties, Preferences, Options, or Setup. For
Macintosh users, choose File > Print, and then adjust the settings from the print
dialog and pop‑up menus.
•
To set Enhance Fine Lines using the Embedded Web Server, type the network
printer IP address in the address field of your Web browser.
221