NordicTrack 29835.1 User Manual page 9

3. Identify the two Rear Stabilizer Tubes (2).
While a second person lifts the rear of the Frame
(1), insert some packaging materials (not shown)
under the Frame. Have the second person
hold the Frame to prevent it from tipping.
Attach a Rear Stabilizer Tube (2) to the Frame
(1) with three M10 x 20mm Screws (91) and
three M10 Split Washers (105).
Attach the other Rear Stabilizer Tube (2) in
the same way.
Next, tighten the Small Leveling Foot (136) into
the Frame (1) in the indicated location.
Then, remove the packaging materials from
under the Frame (1).
4. Identify the Upright Cover (81). Orient the
Upright Cover as shown, and slide it upward
onto the Upright (4).
Have a second person hold the Upright (4) and
the Upright Cover (81) near the Frame (1).
Connect the Upper Wire (152) to the Lower
Wire (111).
3
2
1
105
91
4
9
136
2
105
4
81
111
1
152