NordicTrack 29835.1 User Manual page 12

9. Identify the Right Pedal (49) and orient it as
shown.
While a second person lifts the Right Pedal Plate
(14), attach the Right Pedal (49) to the Right
Pedal Plate with five M6 x 16mm Screws (103)
and five M6 Washers (90). Tip: It may be help-
ful to lift the right Pedal Arm (44).
Attach the Left Pedal (12) to the Left Pedal
Plate (not shown) in the same way.
10. Apply grease to a Medium Axle (119) and to two
M8 x 22mm Washers (97).
Identify the Right Link Arm (59) and orient it as
shown.
Insert the Medium Axle (119) through the Right
Link Arm (59) and the right Pedal Arm (44).
Tighten an M8 x 16mm Screw (82), an Axle
Cover (55), and an M8 x 22mm Washer (97) into
each end of the Medium Axle (119) at the same
time. To avoid damaging the plastic, do not
overtighten the Screws.
Repeat this step on the other side of the
elliptical.
9
14
12
44
90
103
10
82
55
97
44
12
49
90
103
59
119
97
55
82
Grease