NordicTrack 29835.1 User Manual page 10

5. Tip: Avoid pinching the wires. Slide the
Upright (4) onto the Frame (1).
Attach the Upright (4) with eight M10 x 20mm
Screws (91) and eight M10 Split Washers (105).
Do not tighten the Screws yet.
Slide the Upright Cover (81) downward. Do not
press the Upright Cover into the Left and
Right Front Shields (73, 74) yet.
6. Identify the Right Upper Body Arm (61) and the
Right Upper Body Leg (60) and orient them as
shown.
Attach the Right Upper Body Arm (61) to the
Right Upper Body Leg (60) with three M8 x
43mm Bolts (96) and three M8 Jam Nuts (102).
Make sure that the Jam Nuts are in the indi-
cated hexagonal holes. Do not tighten the
Bolts yet.
Attach the Left Upper Body Arm (47) to the
Left Upper Body Leg (46) in the same way.
5
81
105
91
73, 74
6
47
46
10
Avoid pinching
the wires
91
105
105
4
1
61
102
96
Hexagonal
60
Holes