Snapshot - D-Link SECURICAM Network DCS-2120 User Manual

Section  - Configuration
Enable snapshot:
Weekly schedule:
Always:
From [00:00] to [00:00]:
Snapshot file name prefix:
Motion detection:
D-Link DCS-10 User Manual
Check this option to enable the snapshot for motion
detection and sequential snapshot.
Select the day(s) according to when you want the
camera to take snapshots.
This enables the camera to take snapshots
continuously.
The time range specified for the snapshot. For
example: the snapshot will start at eight o'clock in
the morning, and stop at five o'clock in the afternoon
when the following time period is input - [From 08:00
to 17:00].
This option will add the prefix to the snapshot file
name. If you don't have enough upload bandwidth,
the video clip file will not complete uploading during
the time interval and the upload file will not able to
playback. To avoid the problem, please reduce the
maximum file size or enlarge the time interval.
This option enables motion detection triggering for snapshot uploading.
Schedule > Snapshot