Schedule Video Recording With Motion Detection - D-Link SECURICAM Network DCS-2120 User Manual

Section  - Configuration

Schedule Video Recording with Motion Detection

To schedule video recording with motion detection, you must first enable motion detection on the Network camera. Click
the Motion Detection button under the Advanced tab from the Configuration screen to access settings that affect how
the DCS-2120 Network camera can serve as a security
device by recording only when motion is detected.
Note: These settings can be configured in your Web
browser and while logged into the IP surveillance
Program.
In this window, follow the steps below to ensure that
motion detection is correctly enabled:
1 Check "Enable motion detection."
2 Click on "New" to have a new window to monitor
video.
3 Enter in a window name.
4 Adjust the "Sensitivity" and "Percentage" levels according to the local environment. The highest sensitivity and
lowest percentage provides the most sensitive setting.
5 After adding the motion window, click on save to enable the activity display. You can add up to 3 motion windows
to trigger recording.
D-Link DCS-10 User Manual 10