Section 4: Configuration
This allows you to set the camera to take snapshots when motion is detected. Snapshots can be sent to an e-mail address or to an FTP server.
Trigger by:
Select the trigger event from the drop-down menu. Motion begins
a snapshot after a motion is detected; Schedule sends "snapshots"
at a specified time; Always provides continuous snapshots.
Snapshot Type:
Select whether to take a single snapshot or to take six snapshots
with a 1 or 2 second interval between them.
Target:
Select where you want the snapshot to be sent. It may be uploaded
to an FTP or sent to an email address.
You will need to enter your FTP or email server/account settings.
D-Link DCS-2630L User Manual
Snapshot
35