Sign in today to find solutions:

Don't have an account? Sign up

 
Wireless Internet Camera
Wireless G USB 2.0 Adapter
with 3G Mobile Video
Next page ->

Summary of Contents

  • Page 1

    Wireless Internet Camera Wireless G USB 2.0 Adapter with 3G Mobile Video...

  • Page 2

    Package Contents D-Link DCS-2120 Wireless Internet Camera with 3G Mobile Video Support Antenna If any of the above items are missing, please contact your reseller. D-Link DCS-10 Quick Install Guide Manual and Software on CD CAT5 Ethernet Cable Power Adapter...

  • Page 3

    As soon as the power adapter is connected to the camera, the power LED will flash red and blue several times, indicating that the DCS-2120 is conducting a self-test. Upon passing the self-test, the LED will turn blue indicating a good connection to the Ethernet port, or red indicating that no connection has been made.

  • Page 4

    Ethernet Cable Connector The DCS-2120 features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling. The port supports the NWay protocol, allowing the DCS-2120 to automatically detect or negotiate the transmission speed of the network. Reset Button Reset is initiated when the reset button is pressed once and the Power LED begins to flash.

  • Page 5

    DC 5V 2A) and connect it to an AC power outlet. The LED will flash red and blue when you first power on the unit. The LED will not turn blue until the camera has received a network IP address. D-Link DCS-10 Quick Install Guide...

  • Page 6

    Software Installation Turn on the computer and Insert the D-Link DCS-2120 Driver CD into the CD-ROM drive. The step-by-step instructions are shown in Windows XP, and are similar in other Windows Click Installation Wizard If the CD Autorun function does not automatically start on your computer, click Windows type “D:\DCS2120.exe”, where D: represents the drive letter of your...

  • Page 7

    D-Link\Installation Wizard, where C: represents the drive letter of your hard drive. To install to a different location, click Browse and specify the location. Click Next Specify a Program Folder. Click Next Setup is complete. Click Finish D-Link DCS-10 Quick Install Guide...

  • Page 8

    Configuration Configuration This section will show you how to configure your new D-Link Wireless Internet Camera using the D-Link Installation Wizard. D-Link Installation Wizard The D-Link DCS-2120 uses the Installation Wizard as the management software. The wizard provides the user an easy interface to change any settings related to the Wireless Internet Camera.

  • Page 9

    Factory Reset will be initiated when the reset button is pressed continuously for 30 seconds. Release the reset button and the Power LED will begin to flash, indicating that the DCS-2120’s settings are restored to factory settings. Click Search to refresh the list of cameras.

  • Page 10

    Click Setup Enter an administrative password in the Admin password and Confirm password fields. Click Next Note: For details on the Date/Time Settings, please refer to the Manual on the CD-ROM. D-Link DCS-10 Quick Install Guide...

  • Page 11

    IP Settings, please refer to the Manual on the CD-ROM. Click Next Users can configure the Wireless Network Settings for the camera, by entering the SSID and selecting the Wireless Mode, Channel, TX Rate, and Preamble. D-Link DCS-10 Quick Install Guide...

  • Page 12

    Click Apply Click the Done button after the settings have been saved. Click Done D-Link DCS-10 Quick Install Guide...

  • Page 13

    Configuration Click the Link to Selected Device(s) button. D-Link DCS-10 Quick Install Guide...

  • Page 14

    After you click the button Link to Selected Device(s), the Installation Wizard will automatically open your Web browser to the IP address of the DCS-2120, in this example it is: http://192.168.0.120. Your DCS-2120 may have a different IP Address. Your Basic Installation is Complete!

  • Page 15

    IP surveillance is a complete management tool and includes all configurable settings. Insert the CD-ROM into the CD-ROM drive. A menu screen will appear as shown below. Click IP surveillance Click Next D-Link DCS-10 Quick Install Guide...

  • Page 16

    Click Yes Click Next Enter an Admin Password for the IP surveillance program. Click Next D-Link DCS-10 Quick Install Guide...

  • Page 17

    IP surveillance Installation Click Next Click Next Click Next D-Link DCS-10 Quick Install Guide...

  • Page 18

    IP surveillance Installation Click Finish After successfully installing IP surveillance, the application program for the DCS-2120 is automatically installed to \Program Files\D-Link\ IP surveillance Directory. D-Link DCS-10 Quick Install Guide...

  • Page 19

    Add a Camera Add a Camera To start IP surveillance, click on Windows Start > Programs > ® D-Link > IP surveillance > Monitor. Once the Authentication screen appears, enter “admin” as your Username and the Password that was entered during the installation of IP surveillance.

  • Page 20

    Click the Insert Channel button located in the upper left corner of the Camera Configuration screen. Enter the IP address of the camera you would like to add. By default, the port number is set at 80. Click OK to continue. Click OK D-Link DCS-10 Quick Install Guide...

  • Page 21

    When the camera screen appears to the right of the Configuration menu screen, this means that a connection has been established. Click the Save button at the bottom of the Configuration menu screen. Click Save Click OK Your IP surveillance Installation is Complete! D-Link DCS-10 Quick Install Guide...

  • Page 22

    Notes Notes D-Link DCS-10 Quick Install Guide...

  • Page 23

    Notes Notes D-Link DCS-10 Quick Install Guide...

  • Page 24

    Notes Notes D-Link DCS-10 Quick Install Guide...

  • Page 25

    Copyright ©00 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Maximum wireless signal rate based on IEEE Standard 0.11g specifications. Actual data throughput will vary.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: