Setting Security - D-Link SECURICAM Network DCS-2120 User Manual

Section  - Security

Setting Security

At this point it is highly recommended that you click on
the Configuration button on the Home screen, and then
the Tools tab to bring you to the Admin screen. Enter a
password for security purposes.
To ensure the highest security and prevent unauthorized
use of the Network camera, the Administrator has the
exclusive privilege to access the System Administration
settings to allow users entry and authorize privileges
for all users. The Network camera supports multi-level
password protection/access to the Network camera
that can be restricted to defined users who have a User
Name and User Password, which is assigned by the
Administrator.
The Administrator can release a public user name and password so that when remote users access the Network
camera they will have the right to view the image transmitted by the Network camera.
When the Network camera is used for the first time, it is highly recommended that the Administrator set the Administrator's
Password to constrain user access to the Network camera since the Default settings are Null String (no password).
Once the Password is defined, only the Administrator has access to the management of the Network camera. This
procedure should be done as soon as possible since the security features of the Network camera will not be enabled
until the Administrator Password is defined.
D-Link DCS-10 User Manual 111