Snapshot - D-Link DCS-5230L User Manual

Section 4 - Configuration

Snapshot

Here, you can set the camera to take snapshots when motion is detected. Snapshots can be sent to an e-mail address
and/or to an FTP server.
Enable Snapshot: Check this box to enable the snapshot feature.
Event Based (Motion Detection): This will set the camera to take a snapshot whenever
motion is detected.
Continuous (FTP only): This will set the camera to take snapshots continuously at
intervals specified in FTP Server > Interval below. You can only save to an FTP server
when taking continuous snapshots.
Scheduled (FTP only): This will set the camera to take snapshots continuously at
intervals specified in FTP Server > Interval below according to schedule you define by
checking days and entering the times you want to record between. You can only save
to an FTP server when taking scheduled snapshots.
E-mail Address: When checked, the camera will send the snapshots it takes to the
e-mail address specified in the following text boxes. If you do not know what to enter
for the User Name, Password, or SMTP Mail Server, contact your e-mail service
provider for details.
User Name: Enter the username or login name for your e-mail account.
Password: Enter the password for your e-mail account.
SMTP Mail Server: Enter the SMTP server for your e-mail account.
Sender E-mail Address: Enter the e-mail address you want to appear as the "From:" e-mail address in the snapshot e-mail.
Recipient E-mail Address: Enter the e-mail address you want to send your snapshots to.
Port: Enter the port used by your SMTP server.
D-Link DCS-5230L User Manual 33