Removing The System Board - Dell OptiPlex 380 Service Manual

Back to Contents Page
System Board
Dell™ OptiPlex™ 380 Service Manual—Small Form Factor
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the System Board

1. Follow the procedures in Before Working Inside Your
2. Remove the optical drive.
3. Remove the hard drive.
4. Remove the expansion card(s).
5. Remove the memory.
6. Remove the heat sink and processor.
7. Disconnect the processor power cable from the system board.
9. Disconnect the hard-drive and optical-drive data cables from the system board.
Computer.