Removing The Display Assembly - Dell Vostro 1200 Service Manual

Back to Contents Page
Display Assembly
Dell™ Vostro™ 1200 Service Manual
Removing the Display Assembly
Replacing the Display Assembly
Removing the Display Bezel
Replacing the Display Bezel
Removing the Display Panel
Removing the Inverter Board
Replacing the Display Panel
Removing the Display Panel Bracket
Replacing the Display Panel Bracket
Removing the Display Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1. Follow the instructions in Before You
2. Remove the battery (see Removing the
3. Remove the hinge cover (see
4. Remove the keyboard (see
5. Disconnect the display cable from the display cable connector on the system board.
6. Disconnect the three Mini Card antenna cables (see
unroute the cables.
7. Disconnect the left and right microphone cables.
1 display cable connector
Begin.
Battery).
Removing the Hinge Cover).
Removing the Keyboard).
Mini Cards) on the bottom of the computer, pull the cables up through the system board, and
2 Mini Card antenna cables (3)