Table of Contents
Advertisement
Back to Contents Page
Internal Card With Bluetooth® Wireless Technology
Dell™ Vostro™ 1200 Service Manual
Removing the Card
Replacing the Card
Removing the Card
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
If you ordered an internal card with Bluetooth wireless technology with your computer, it is already installed.
1. Follow the procedures in
Before You
2. Remove the battery (see
Removing the
3. Remove the screw on the card cover, and remove the cover.
4. Remove the card out of the compartment.
5. Disconnect the cable from the card connector.
1 card
2 connector
3 compartment 4 cover
5 screw
NOTICE:
Be careful when removing the card to avoid damaging the card, card cable, or surrounding components.
Replacing the Card
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching a connector on the back panel of the
computer.
1. Connect the cable to the card connector.
2. Place the card into the compartment.
Begin.
Battery).
Advertisement
Table of Contents
