Table of Contents
Advertisement
6. Replace the battery (see
Replacing the
Removing a Flash Cache Memory Card
1. Ground yourself by touching one of the metal connectors on the back of the computer.
NOTE:
If you leave the area, ground yourself again when you return to the computer.
NOTE:
Depending on the type of card, not all cables may be in use.
2. Disconnect the cables from the flash cache memory (FCM) card.
3. Remove the screws.
4. Slide the card at a 45-degree angle out of its connector.
1
FCM card
3
screws (2)
Replacing a Flash Cache Memory Card
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.
NOTICE:
To avoid damaging the card, never place cables on top of or under the card.
NOTE:
The card may have two or three connectors, depending on the type of card you ordered.
1. Move any cables out of the way to make space for the FCM card.
2. Align the card with the connector at a 45-degree angle, and press the card into the connector until it clicks.
NOTE:
For more specific information about which cable to connect to which connector, see the documentation that came with your card.
3. Replace the screws on the FCM card.
4. Connect the cables to the FCM card.
5. Replace the cover.
6. Replace the Battery (see
Removing the
Back to Contents Page
Battery).
2
connector
Battery).
Advertisement
Table of Contents
