ZyXEL Communications ZyWALL USG 1000 User Manual page 119

Enable the interface and add it to a zone. It is highly recommended that you set
4
the Zone to WAN to apply your WAN zone security settings to this 3G connection.
Leaving Zone set to none has the ZyWALL not apply any security settings to the
3G connection. Enter the PIN Code provided by the cellular 3G service provider
(0000 in this example).
Figure 73 Configuration > Network > Interface > Cellular > Edit
Go to the Dashboard. The Interface Status Summary section should contain a
5
"cellular" entry. When its connection status is Connected you can use the 3G
connection to access the Internet.
Figure 74 Status
The ZyWALL automatically adds the cellular interface to the system default WAN
6
trunk. If the ZyWALL is using a user-configured trunk as its default trunk and you
want this cellular interface to be part of it, use the Trunk screens to add it.
ZyWALL USG 1000 User's Guide
Chapter 7 Tutorials
123