Table of Contents
Advertisement
Recording
Stills
Note:
Recording
of stilt images is possible on DVD-RAM disc
and card.
ACCESS/PC
indicator
__
PHOTO button
CARD ACCESS
indicator
5 Press the PHOTO botton
all the way (full
pressing).
Tile screen will be black, and then the
recorded
still will be displayed.
When the
'0 I1" mark appears,
you can proceed
with
tile next recording;
while
"DISC ACCESS"
o1"
"CARD ACCESS" is being displayed,
you
cannot proceed
with the next recording.
Note:
• If you wish to record without locating a subject at the
center of screen, first locate the subject at the center
1
Remove
tile lens cap, and then point tile DVD
of screen, press the PHOTO button halfway down,
determine
the composition
to be recorded, and then
press the PHOTO button all the way down
• If you press the PHOTO button all the way down at
one stroke without pressing tt hatf way, recording wiIt
be possible, but the focus witl be incorrect.
• See ':SIZE AND QUAMTY OF PHOTOS " on page 30
for details of photos on card
• See ':Check 2" on page 158 if recording photos is not
possibte.
• Shake of the DVD video camera/recorder
may cause
blur in recorded image
video camera/recorder
at subject.
2
Turn the DVD camera/recorder
on.
When using DVD RAM disc:
Set the power
switch to '1"1".
When using card:
Set the power
switch to "lg_".
After the ACCESS indicator goes out,
perform the subsequent operation:
3 Check the subject on the screen (viewfinder
or LCD).
When using the viewfinder, ptfll it out and
close the LCD monitor.
• When holding the DVD video camera/recorder
for
recording,
grasp it securely with both hands.
• When recording with higher zoom magnification,
it is
recommended
that you secure the DVD video
camera/recorder
on a tripod
• Do not operate the power switch or remove the card
white the ACCESS/PC
or CARD ACCESS
indicator is
lit or btinking: Doing so may damage the card or the
data on card.
• The range of screen tn wNch recording is possible witt
be different for movie and still.
• If focusing is difficult with auto focus, choose manual
focus, and manually correct the focus before
recording (see page 72)
• There may be a difference between the image you
see on the LCD screen or vtewfinder and the
recorded
image.
4
Press the PHOTO button
halfway
(half
pressing).
The DVD video camera/recoMer
will
automatically
focus on the subject at the
center of screen, and the "OI1" indicator
on
screen will light in purple
(the focus will not
change v,;hen manual
focus is chosen).
51
Hide quick links:
Advertisement
Table of Contents
