Frame - Hitachi DZ-MV780A Instruction Manual

SELECTING MULTIPLE SCENES
1 Press the DISC NAVIGATION button.
2 Use
the I_I_/_I/"_(I/II'I) huttons to select
tile desired scene.
3
Press the SELECT button once:
The selected scene will be fl'amed in red and
yellow.
Repeat steps 2 and 3 to randomly select
multiple scenes.
SELECTING CONSECUTIVE SCENES TOGETHER
1 Press the DISC NAVIGATION bntton.
2 Use the I_NI/I_I/_/
buttons to select the
desired scene.
O Hold down the
SELECT hutton for at
least one second:
The selected scene will
be donbly Dan-led in
yellow and hlue.
4
Use the 14NI/_I/_I/
buttons to select tile
last scene in the range
you want, and then
press the I)/11 button:
The thumhnails of
scenes in the specified
range will be fl'amed in
red, and then selected.
Yellow frame
Double frames in
yellow and blue
I_Ali PI0qlams 010/014 I
Red
frame
When scenes up to
this point are selected
Note:
• You can know the status of scenes from the colors of
cursor and bargraph:
Yellow Light blue Current cursor position
Blue Light blue Range of scenes being
selected
Red Red Scenes already selected
• Pressing the 1_/11 button after selecting scenes will
play back only the selected scenes from the
beginning of each.
• To cancel a selected scene, select the scene to be
canceled, and then press the SELECT button.
To cancel all selected scenes, press the • button.
• You can also setect scenes in reverse from the last
scene in the range
• To release muttipte selection, press the • or SELECT
button before pressing the I_/11 button in step 4.
• Up to 999 scenes can be seIected for both disc and
card
106