Setting Up The Battery; Charging Battery - Hitachi DZ-MV780A Instruction Manual

Setting Up the Battery
The DZ-BP14S battery provided with DZ-GX20A or DZ-BP7S battery provided with DZ-MV780A and
DZ-MV730A has not been charged at purchase time: Charge it before using the DVD video camera/
recorder.
Note:
• Be sure to use the DZ-BP14S, DZ-BP7S, DZ-BP14SW (optionaI) or DZ-BP7SW (optional, unavailable for DZ-
GX2OA) battery for the DVD video camera/recorder: Using other batteries coutd cause the DVD video camera/
recorder to malfunction, or result in fire.
• Be sure to use the DZ-ACS2 AC adapter/charger to charge the battery: Using other chargers could cause electric
shock or fire
• Charge the battery at temperatures of 50 - 86°F (10 - 30°C).
• If the CHARGE indicator does not light when the AC adapter/charger is plugged into AC outlet, unplug it from the
AC outlet, wait a few moments, and then plug it into the AC outlet again If the CHARGE indicator stitl does not
light, the AC adapter/charger may be faulty. Unplug it from the AC outlet and consutt your deater.
• The AC adapter/charger can be used around the world. An AC plug adapter is required in some foreign countries
If you need one, purchase it from your Iocal electronics distributor.
AC 200 - 240V
AC Plug Adapter (not supplied)
CHARGING BATTERY
Use the provided AC adapter/charger to charge
tile battery.
1 Connect tile power cable to AC adapter/
charger.
2 Plug the power cable into AC outlet.
3 Attach
the battery to AC adapter/charger.
Note:
When charging a battery, unplug the DC power cord
from the DC output jack on AC adapter/charger.
Battery
CHARGE
Power cable
CHARGE indicator AC adapter/charger
DC output terminal
39