Hitachi DZ-MV780A Instruction Manual page 47

REMOVING DISC
A
/ Press down tile DISC
EJECT button once and
release it.
In a i_lon-lent, the cover
of disc insertion block
will open.
If tile DVD video
calllera/recorder is oil
at this time, the
"EJECT" indicator will blink oil tile LCD
monitor or in the viewfinder.
2
Gently open tile cover"
fiflly tmtil it stops. _ _:_
3
Remove tile disc.
While pushing down tile center portion of
turntable, pick up tile disc, bolding its edge,
to remove it.
Note:
• Do not remove the battery or disconnect the AC
adapter/charger during removaI of the disc or untit
power is completely turned off: If you do, the disc
cover wilt not open. If this happens, reattach the
battery or AC adapter/charger, push down the DISC
EJECT button once, and then release it
• Do not insert anything other than the 8 cm DVD-RAM
or DVD-R disc into the disc insertion block: Doing so
could cause malfunctions.
• When inserting or removing the disc, BE SURE NOT
to look into the tens in laser pickup: Doing so could
damage your eyesight.
• If the battery remaining level runs out, set the power
switch to "OFF" to remove the disc (see page 42)
Turntable
4
Gently push tile section
indicated "PUSH CLOSE"
on the covet" of disc
insertion block, to close tile
cover'.
47