Viewing Image On Lcd Monitor - Hitachi DZ-MV780A Instruction Manual

VIEWING IMAGE ON LCD MONITOR SCREEN
If you open tile LCD monitoi; you can n-lonitor subject in-lage oil the LCD screen.
1 Open tile LCD monitor.
The LCD monitor has a portion where you
can hook your finger. Hook tile finger there to
open the monitor.
ORange where the LCD monitor can
be moved
Tile LCD monitor can be opened up to
approximately 900.
If the LCD monitor is open 90 °, it can be tilted
with the screen down as much as 900, and can
also be tilted with screen up and turned up to
180° so the screen f._ces in tile same direction as
tile lens.
(Bottom)
Hook your finger
If the L CD monitor is turned 1800so the screen
f_ces in tile same direction as the lens during
recording, subject image will also appear in tile
viewfinder as a mirror image (left/right
reversed).
Tilt the LCD monitor to adjust its vertical angle
so that you can see tile screen easily.
Note:
• If no image appears on LCD monitor screen, refer to
"Check T' on page 159
• If LCD monitor lights white, refer to page 87.
• Be sure to open the LCD monitor approximately 90 o
before changing its vertical angle.
• Do not record for a prolonged time with the LCD
monitor turned approximately 1800 in close contact
with the DVD video camera/recorder body: Doing this
could cause the DVD video camera/recorder and LCD
monitor to become hot
35