Temporary Tone Dialing; Redial List; Find Handset; Join A Call In Progress - VTech DS6520-22 User Manual

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to tone dialing
temporarily during a call.
. During a call, press
2. Use the dialing keys to enter the relevant number. The telephone sends
touch-tone signals. It automatically returns to pulse dialing mode after you end
the call.

Find handset

Use this feature to find all system handsets.
To start paging:
Press /FIND HANDSET on the telephone base. All idle
•
handsets ring and display ** Paging **.
To end paging:
• Press /FIND HANDSET again on the telephone base.
• Press /HOME,
key on the handset.
• Place the handset in the telephone base or charger.
Do not press and hold /FIND HANDSET for more than four seconds. It may lead to
handset deregistration.

Redial list

Each handset stores the last 0 telephone numbers dialed.
To review and dial a number from the redial list:
Press REDIAL when the handset is not in use.
.
or or REDIAL repeatedly until the desired entry displays.
2. Press ,
/HOME or
3. Press
To delete a redial entry:
When the desired redial entry displays, press DELETE.

Join a call in progress

You can use up to two system handsets at a time on a home line call. You can buy
additional expansion handsets (DS6501/DS6501-12/DS6501-15/DS6501-16) for
this telephone base. You can register up to five handsets to the telephone base.
• When a handset is on a call, press
the call.
Press OFF to exit the call. The call continues until all handsets hang up.
•

Transfer a call

While on an outside call, you can transfer the call from one handset to another.
. During a call, press MENU.
2. Press or
to enter a destination handset number.
3. To answer the call on the destination handset, press
Intercom
Use the intercom features for conversations between two handsets.
Press MENU on your handset when not in use.
.
2. Press or
to enter a destination handset number.
3. To answer the intercom call, press
destination handset.
To end the intercom call, press OFF or place the handset back in the telephone
4.
base or charger.

Answer an incoming call during an intercom call

If you receive an incoming call during an intercom call, there is an alert tone.
• To answer a home call, press
To end the intercom call without answering the outside call, press OFF. The
•
intercom call ends and the telephone continues to ring.
• To answer a cell call, press OFF to end the intercom call. The telephone
continues to ring. Then press
Directory
The directory can store up to 200 entries and are shared by all system handsets.
To add a directory entry:
Press MENU when the phone is not in use.
.
Scroll to Directory then press SELECT twice.
2.
3. Enter the number.
• Use the dialing keys to enter the number (up to 30 digits).
-OR-
Copy a number from the redial list by pressing REDIAL. Then press
•
REDIAL repeatedly to select a number. Press SELECT.
.
/CELL, , CANCEL or any dialing
/CELL to dial.
to scroll to Transfer, then press SELECT. Use the dialing keys
to scroll to Intercom, then press SELECT. Use the dialing keys
/HOME or
/HOME, /CELL or
/HOME. The intercom call ends automatically.
/CELL.
8
on another handset to join
/HOME, /CELL or
on the
.
, or