Deleting Patches (Patch Delete); Creating A Patch Intuitively (Sound Shaper) - Roland V-Synth Owner's Manual

Creating a Patch

Deleting Patches (PATCH Delete)

Delete unneeded patches from the internal memory.
1. Touch <▼ MENU> in the upper right of the screen.
A pulldown menu appears.
fig.01-05_50
2. In the pulldown menu, touch <PATCH Delete>.
The PATCH Delete List window appears.
fig.03-06a_50
3. From the list, select the patch that you want to delete.
Either turn the VALUE dial or use [INC/+][DEC/-] to select a
patch. You can also select a patch by touching it on the display.
Each screen in the PATCH Delete List window shows a group of
16 patches. To view other patches, touch <017-032>–<241-256>,
located at either side of the screen. To view higher-numbered
patches, touch <257-512>, located at the bottom of the screen.
4. Touch <Execute>.
The selected patch will be deleted.
5. If you want to continue deleting other patches, repeat steps
3 and 4.
6. Press [EXIT].
The PATCH Delete List window closes.
76
Creating a patch intuitively
(Sound Shaper)
The Sound Shaper function lets you create a sound simply by
choosing the appropriate group and template for the type of sound
you want to create, and using the knobs and buttons to edit the
relevant parameters just like a professional sound designer.
1. Make sure that the PATCH PLAY screen is displayed.
2. In the upper right of the screen, touch <▼ MENU >.
A pulldown menu appears.
3. In the pulldown menu, touch < Sound Shaper >.
A window like the following appears.
Choose the "group" and "template" that are closest to the type
of sound you want to create.
Choose the group from the list at left, choose the template from
the list at right, then touch < Enter >.