23: Analog Phaser; 24: Digital Phaser - Roland V-Synth Owner's Manual

Effects List

23: Analog Phaser

This effect features two analog-type phasers arranged in parallel,
making it stereo compatible. The sound as it cyclically drifts in and
out of phase is added to the source sound, creating the modulation
with the characteristic of phasers.
fig.MFX-23
L
Analog
Phaser
R
Parameter Value
Shift Mode 4STAGE,
8STAGE
Level
Level
Center Freq #1 0–127
Resonance 0–127
LFO 1/2 Rate 0.02–5.00 Hz,
note
LFO 1/2 Depth 0–127
LFO 1/2 Phase NORM, INV
178
Description
Sets the number of stages in the
phase shift circuit (four (4STAG)
or eight (8STAGE)).
Setting this to eight stages
(8STAGE) increases the number
of the frequency points that
sound is canceled, giving a
sharper effect.
4 stage
Freq.
8 stage
Freq.
Sets the center frequency to
which the phaser effect is ap-
plied.
Increasing this value moves the
effect point of the phaser into
higher frequency ranges.
Amount of feedback
Increasing this value gives a
more distinctive sound to the ef-
fect.
Sets the rate of the swelling
sound.
Specifies the depth of modula-
tion.
Sets the phase of both left and
right swelling.
NORM: The left and right phase
will be the same.
INV: The left and right phase
will be opposite.

24: Digital Phaser

Phaser is an effect that adds a phase-shifted sound to the original
sound to create time-varying change, modulating the sound.
fig.MFX-24
L
Phaser
R
Parameter Value
Shift Mode 4STAGE,
8STAGE
Level
Level
Manual 0–127
Rate #1 0.05–10.0 Hz,
note
Depth #2 0–127
Phase NORM, INV
Resonance 0–127
Mix Level 0–127
Ps Low Freq 50–4000 Hz
Ps Low Gain -15– +15 dB
Ps Hi Freq 2000–20000 Hz
Ps Hi Gain -15– +15 dB
2-Band
EQ
Description
Sets the number of stages in the
phase shift circuit (four (4STAG)
or eight (8STAGE)).
Setting this to eight stages
(8STAGE) increases the number
of the frequency points that
sound is canceled, giving a
sharper effect.
4 stage
Freq.
8 stage
Freq.
Specifies the center frequency at
which the sound is modulated.
Specifies the frequency of mod-
ulation.
Specifies the depth of modula-
tion.
Sets the phase of both left and
right swelling.
NORM: The left and right phase
will be the same.
INV: The left and right phase
will be opposite.
Specifies the amount of feed-
back for the phaser.
Higher settings will give the
sound a stronger character.
Volume of the phase-shifted
sound, relative to the direct
sound
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range