Roland V-Synth Owner's Manual page 130

VFX3: Visual effects 3
VFX4: Visual effects 4
OUTPUT-FADE: Output fade
T-BAR: T bar
Assign-TT (V-LINK Assign-Time Trip)
Specify the V-LINK function that will be controlled when you
operate the Time Trip pad in Time Trip mode.
Value
OFF: The time trip pad will not be used.
TIME-TRIP: Time trip
Knob 1, 2 Local Sw
(V-LINK Knob1, 2 Local Switch)
Specify whether the assignable controller knobs 1 or 2 will be
disconnected from the internal sound generator in V-LINK mode
(OFF) or not disconnected (ON).
Value: OFF, ON
Knob 1, 2 Assign (V-LINK Knob1, 2 Assign)
Specify the V-LINK function that will be controlled when you turn
the ASSIGNABLE CONTROL knob.
Value
OFF: The assignable controller will not be used.
PLAYBACK-SPEED: Playback speed
DISSOLVE-TIME: Dissolve time (time over which the image
switches)
AUDIO LEVEL: Volume during audio playback
COLOR-CB: Color Cb (color-difference signal)
COLOR-CR: Color Cr (color-difference signal)
BRIGHTNESS: Brightness
VFX1: Visual effects 1
VFX2: Visual effects 2
VFX3: Visual effects 3
VFX4: Visual effects 4
OUTPUT-FADE: Output fade
Settings Common to All Modes (System Mode)
Beam
fig.05-12_50
Beam Local Sw (V-LINK D Beam Local Switch)
Specify whether the D Beam controller will be disconnected from the
internal sound generator in V-LINK mode (OFF) or not disconnected
(ON).
Value: OFF, ON
D Beam 1–4 Assign L, R
(V-LINK D Beam1–4 Assign L, R)
Specify the V-LINK function that will be controlled when you
operate the D Beam controller. Assign L is the left side, and Assign R
is the right side.
Value
OFF: The D Beam controller will not be used.
PLAYBACK-SPEED: Playback speed
DISSOLVE-TIME: Dissolve time (time over which the image
switches)
AUDIO LEVEL: Volume during audio playback
COLOR-CB: Color Cb (color-difference signal)
COLOR-CR: Color Cr (color-difference signal)
BRIGHTNESS: Brightness
VFX1: Visual effects 1
VFX2: Visual effects 2
VFX3: Visual effects 3
VFX4: Visual effects 4
OUTPUT-FADE: Output fade
129