V-Link Settings (V-Link) - Roland V-Synth Owner's Manual

Settings Common to All Modes (System Mode)

V-LINK Settings (V-LINK)

Tx
fig.05-10_50
MIDI Channel (V-LINK MIDI Channel)
Specifies the channel used to transmit MIDI messages for V-LINK
control.
Value: 1–16
Audio (V-LINK Audio Switch)
Specifies whether sound from the externally connected video device
will be played (ON) or not played (OFF).
Value: OFF, ON
KBD Output
(V-LINK Keyboard Output Fade Switch)
Specifies whether the video output from the video device will be
stopped (ON) or will not be stopped (OFF) when you are not
holding down a key.
Value: OFF, ON
Palette Local Sw
(V-LINK Patch Palette Local Switch)
Specify whether you will press PATCH PALETTE NUMBER [1]–[8]
in V-LINK mode to switch patches (ON) or not (OFF)
Value: OFF, ON
128
TT Pad/Knob
fig.05-11_50
TT Pad Local Sw
(V-LINK Time Trip Pad Local Switch)
Specify whether the Time Trip pad and the internal sound generator
will be disconnected in V-LINK mode (OFF) or not disconnected
(ON).
Value: OFF, ON
X Assign-XY (V-LINK X Assign-XY)
Specify the V-LINK function that will be controlled when you
operate the Time Trip pad in the X (horizontal) direction in XY
mode.
Value
OFF: The time trip pad will not be used.
PLAYBACK-SPEED: Playback speed
DISSOLVE-TIME: Dissolve time (time over which the image
switches)
AUDIO LEVEL: Volume during audio playback
COLOR-CB: Color Cb (color-difference signal)
COLOR-CR: Color Cr (color-difference signal)
BRIGHTNESS: Brightness
VFX1: Visual effects 1
VFX2: Visual effects 2
VFX3: Visual effects 3
VFX4: Visual effects 4
OUTPUT-FADE: Output fade
T-BAR: T bar
Y Assign-XY (Link Y Assign-XY)
Specify the V-LINK function that will be controlled when you
operate the Time Trip pad in the Y (vertical) direction in XY mode.
Value
OFF: The time trip pad will not be used.
PLAYBACK-SPEED: Playback speed
DISSOLVE-TIME: Dissolve time (time over which the image
switches)
AUDIO LEVEL: Volume during audio playback
COLOR-CB: Color Cb (color-difference signal)
COLOR-CR: Color Cr (color-difference signal)
BRIGHTNESS: Brightness
VFX1: Visual effects 1
VFX2: Visual effects 2