Setting The Date And Time - Mitsubishi Electric PV-S4200-IT Operating Manual

5.4.2 Setting the Date and Time

Step
1
Blinking
2
Blinking
Blinking
3
Caution:
Set the date and time for the PV inverter. Date and time settings cannot be made for the Data logger (PV-LOG30).
This product does not feature a summer-time adjustment function. Be sure, therefore, to readjust the time when the
time changes for summer time.
LCD screen
SETUP 1
DATE/TIME
LANGUAGE
UNIT PRICE
DEVICE ADDRESS
Touch and release the
[ENTER] button once.
DATE/TIME
10 MAY 2011
21:58:00
SET
QUIT
Touch and release the
[SELECT] button once.
DATE/TIME
10 MAY 2011
21:58:00
SET
QUIT
Touch and release the
[ENTER] button once.
DATE/TIME
10 MAY 2011
21:58:00
SET
QUIT
Touch and release the
[ENTER] button once.
DATE/TIME
Touch and release the
10 MAY 2011
21:58:00 [ENTER] button once.
SET
QUIT
Touch and release the
[SELECT] button once.
DATE/TIME
Touch and release the
10 MAY 2011
[ENTER] button once.
21:58:00
SET
QUIT
Touch and release the
[SELECT] button once.
The «SETUP 1» screen as shown in the LCD screen
at left is displayed.
« » arrow selects DATE/TIME.
If not selected, touch and release the [SELECT]
button and move the « » arrow.
Touch and release the [ENTER] button.
The screen item is indicated by a blinking display as
shown on the left.
The hour, minute, year, month, and day for the clock
built into the PV inverter can be changed here.
1. Each time the [SELECT] button is touched and
released, the blinking number on the LCD screen
shown at left switches through
0 1 2 3
0 1 ............8 9
JAN
as shown.
2. Touch and release the [ENTER] button to shift the
blinking light 1 column to the right.
Caution:
Seconds cannot be changed. When confirmed, the
seconds column is set to 00 seconds.
The time display and setting uses standard time.
This unit cannot be adjusted to summer time.
Touch and release the [SELECT] button, and use the
« » arrow to select SET or QUIT.
To confirm changes
p.46
Select SET and touch and release the [ENTER]
To Step 3
button.
Confirm the setting value, and return to the «SETUP
1» screen (p.46 [5.4.1 Step 3]).
Caution:
If settings are incorrect, return to Step 2.
To redo a change
p.46
Touch and release the [SELECT] button 2 times,
To Step 3
and return to Step 2.
To return without making any changes
Select QUIT and touch and release the [ENTER]
button to discard the change, and return to the
«SETUP 1» screen (p.46 [5.4.1 Step 3]).
48
Procedure
............
FEB NOV DEC