ShoreTel 565g User Manual page 34

Step 5
Step 6
Step 7
Step 8
Javier Escuela
9:41pm June 22
Pickup
Details:
To have audio automatically routed to your Bluetooth headset, See
•
"Changing Automatic Off Hook Preference" on page 27.
The IP 565g can only pair with one headset at a time. Attempting to pair
•
with a second headset will result in the first headset being "bumped".
Once a headset is paired, it should automatically connect with the IP
•
565g whenever it is in range. There is no need to re-pair the Bluetooth
headset each time the headset is brought within range of the IP phone.
Some Bluetooth headsets may allow pairing with more than one phone at
•
the same time. If these headsets are within range of two or more phones
with which they are paired, it is up to the headset manufacturer to
determine with which phone they will connect.
34
When you have finished entering the pairing mode on the
headset, press the Search soft key on your 565g IP phone.
The screen indicates that it is searching for a Bluetooth
headset. It may take a minute or two to complete the search.
If one or more headsets are within range, select the desired
headset by pressing the Select soft key.
A screen appears requesting a 4-digit security code. This
code varies from one headset to the next. Check the
documentation that came with your headset for this security
code and enter it on your IP 565g phone using the keypad.
Press the OK soft key when finished.
After a moment a screen appears indicating that the pairing
is complete. Press the OK soft key.
Unpark
Should you desire to unpair your headset with your IP
phone, simply follow steps 1 - 3 of this procedure and select
the Unpair soft key.
217
frtDsk
Mode
This symbol indicates
successful pairing of
the Bluetooth headset
with your 565g IP
phone. The symbol
changes to grey (with
a line through it) if the
headset is powered off
or is out of range.