Table of Contents
Advertisement
3-10. CHANGING THE FILTER
ENVELOPE (Continued)
703
4.
Lift the filter screen assembly from the drain pan.
5.
Wipe the shortening and crumbs from the filter drain pan.
Clean the filter drain pan with soap and water. Thoroughly
rinse with hot water.
6.
Unthread the standpipe from the filter screen assembly.
7.
Remove the crumb catcher and clean thoroughly with
hot water.
8.
Remove the filter clips and discard the filter envelope.
9.
Clean the top and bottom filter screen with soap and
water. Rinse thoroughly with hot water.
Be sure that the filter screens, crumb catcher, filter clips,
and the standpipe are thoroughly dry before assembly of
filter envelope as water will dissolve the filter paper.
10. Assemble the top filter screen to the bottom filter screen.
11.
Slide the screens into a clean filter envelope.
12. Fold the corners in and then double fold the open end.
13. Clamp the envelope in place with the two filter retaining clips.
14. Replace the crumb catcher screen on top of the filter
paper. Screw on the standpipe assembly.
15. Place complete filter screen assembly back into filter
drain pan and slide pan back into place beneath the fryer.
16. Connect the filter union by hand. Do not use a wrench to
tighten.
17. Slide the condensation drain pan back into place. The
fryer is now ready to operate.
Model OFE- 291
3-17
Advertisement
Table of Contents
