Table of Contents
Advertisement
Listening to the radio (continued)
GX-CD5200V
ENGLISH
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
● "
" will appear when an FM broadcast is in stereo.
● If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
■ Memorising a station
You can store 40 (FM, SW-1, SW-2 and MW) stations in memory and
recall them at the push of a button. (Preset tuning)
1
Perform steps 1 - 3 in "Tuning" on page 28.
2
Press the MEMORY button to enter the preset tuning sav-
ing mode.
3
Within 30 seconds, press the PRESET (
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 30 seconds, press the MEMORY button to store that
station in memory.
If the "MEMORY" and preset number indicators disappear be-
fore the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
E-29
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead disconnection.
■ To recall a memorised station
Press the PRESET (
lect the desired station.
FM stereo mode indicator
■ To scan the preset stations
The stations saved in memory can be scanned automatically.
(Preset memory scan)
FM stereo receiving indicator
1 Press the PRESET (
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Press the PRESET (
tion is located.
■ To erase entire preset memory
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Whilst pressing down the REC PAUSE
TINUOUS PLAYBACK
button until "TUNER CL" appears.
or
) button to
04/1/28
or
) button for less than 0.5 seconds to se-
or
) button for more than 0.5 seconds.
or
) button again when the desired sta-
button and the CON-
button, press the TUNER (BAND)
CX-GD5200V_EN2.fm
Advertisement
Table of Contents
