Sharp GX-CD5200V Operation Manual page 37

Timer playback or timer recording
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 14).
If it is not set, you cannot use the timer function.
2 For timer playback: Load a cassette or disc to be played.
For timer recording: Load a cassette for recording in the cas-
sette compartment.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
"ONCE" or "DAILY", and press the MEMORY button.
Set the unit to the correct time if "ONCE" or "DAILY" does not
appear.
4
Within 10 seconds, press the
"ONCE SET" or "DAILY SET", and press the MEMORY
button.
5
Press the
press the MEMORY button.
The illustrations show the daily timer setting.
6
Press the
the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
7
Press the
press the MEMORY button.
8
Set the time to finish as in steps 6 and 7 above.
9
Switch input with the
MEMORY button.
or button to select
To select the timer playback source: VIDEO CD/CD, TUNER,
TAPE 1 or TAPE 2.
To select the timer recording source: TUNER.
● When you select the tuner, select a station by pressing the
● If a station has not been programmed, "NO P.SET" will be
displayed and timer setting will be cancelled.
04/1/28
or button to select
or button to select "PLAY" or "REC", and
or button to adjust the hour and then press
or button to adjust the minutes and then
or button, and then press the
or button, and then press the MEMORY button.
CX-GD5200V_EN2.fm
GX-CD5200V
ENGLISH
E-36