Sharp GX-CD5200V Operation Manual page 28

CD playback (continued)
GX-CD5200V
ENGLISH
MP3 disc:
MP3 is a form of compression. It is an acronym which stands for
MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant com-
pression from the original audio source with very little loss in sound
quality.
Notes:
● Due to the structure of its disc information, it takes longer to read
an MP3 disc than a normal CD (approximately 20 to 90 seconds).
● "
" indicator will light up if an MP3 disc is initialised.
● This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
● During VBR file playback, time counter in the FL display may differ
from its actual playback time.
● Bitrate which is supported by MP3 is 32 ~ 320 kbps.
■ To change the display (MP3 discs only)
Whilst in the stop mode or playback mode, press the DIMMER/DIS-
PLAY button.
Each time the button is pressed, the display will change as follows.
[When in the stop mode]
Total number of tracks
[When in the playback mode]
Track number
Elapsed playback
time
E-27
Folder name
Track name
Folder name
Track name
■ To select the desired folder or track by name
(MP3 discs only)
1
Whilst in the stop mode, press the DIMMER/DISPLAY
button to display the folder name.
2
Select the desired folder by pressing the
button.
3
Press the DIMMER/DISPLAY button
to display the track name.
4
Select the desired track by pressing the
button.
5
Press the / ( / SELECT/
RESUME) button to begin playback.
04/1/28 CX-GD5200V_EN2.fm
or
or