Using The Tft Monitor - Jensen VM9216BT Operating Instructions Manual

USING THE TFT MONITOR

Opening/Closing the TFT Monitor
Open TFT Monitor
Press the OPEN button on the front panel or press the
control to activate the mechanism that moves the display panel into the viewing
position.
Close TFT Monitor
Press the OPEN button on the front panel or press the
control to load the display panel back into the compartment.
TFT Monitor Auto Open
• If "TFT Auto Open" is "on" when the unit is turned on, the monitor automatically
moves to the viewing position.
• If "TFT Auto Open" is "off" when the unit is turned on, press the OPEN button
on the front panel or press the
monitor into the viewing position.
• If "TFT Auto Open" is set to "Manual", the TFT will not close when the key is
turned off.
Monitor Tilt Angle Adjustment
A known characteristic of LCD panels is the quality of the display in relationship to
the viewing angle. The monitor angle can be adjusted for optimum viewing using
one of the following methods:
Step-by-Step Angle Adjustment
• Press the TILT
of the screen one step at a time.
• Press the TILT button on the unit. While the blue tilt icon is flashing, turn the
rotary encoder to adjust the screen angle.
Continuous Angle Adjustment
Press and hold the TILT
in a continuous motion.
14
or TILT
button on the remote control to adjust the tilt angle
or TILT
button on the remote control to move the
on the remote control to adjust the tilt angle
VM9216BT
button on the remote
button on the remote