Nautilus EV916 Assembly Manual page 10

C H A N G I N G T H E G A M E I N H E A LT H A N D F I T N E S S
™
17. Install the (1) Bottom Pivot Cover #1 and (1) Bottom Pivot Cover #2 and align the holes at the sides of the swing
arm tube (see Figure4).
18. Install and tighten (5) #10-32 Phillips head screws. This requires a #2 Phillips head screwdriver.
19. Repeat steps17 and 18 for the opposite swing arm tube.
Figure 4
#10-32x.75 Screw
#10-32x.75 Screw
Bottom Pivot Cover #2
Bottom Pivot Cover #1
8