Impex Hers MS-68 Owner's Manual page 5

STEP 1 (See Diagram1)
A.) Place the Stepper on flat surface. Lift up both Foot Pedals (#7).
B.) Insert the Pulley Bracket (#6) into the front opening on the Main Frame (#1).
C.) Route the Cable (#8) around the Pulley (#9). Make sure the Cable is "inside" the grove
of the Pulley.
D.) Press the Foot Pedals down.
STEP 2 (See Diagram 2)
A.) Install two 1.5v AA batteries into the Computer.
4
DIAGRAM 1