Assembly Instruction - Impex MB-2000 Owner's Manual

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and one Allen Wrench.
NOTE: It is strongly recommended two or more people assembling this equipment to avoid
possible injury.
STEP 1 (See Diagram 1)
A.) Do not tighten Nuts and Bolts until instructed to do so.
B.) Connect the Upright Post-1 (#1) and Upright Post-3 (#3) with a Lower Cross Brace (#5) in the mid-
span. Secure each end with two M12 x 4 1/8" Hex Bolts (#27), one Curved Bracket (#15), four Ø 1"
Curved Washers (#35), and two M12 Aircraft Nuts (#36).
C.) Connect the Upright Post-1 and Upright Post-3 with an Upper Cross Brace (#6) on the top. Secure
each end with two M12 x 4 1/8" Hex Bolts (#27), one Curved Bracket (#15), four Ø 1" Curved
Washers (#35), and two M12 Aircraft Nuts (#36).
6
DIAGRAM 1