Impex MB-2000 Owner's Manual page 12

Step 6 (See Diagram 6)
A.) Place the Right & Left Monkey Bars (#7 & #8) onto the Upper Cross Brace (#6).
B.) Secure each end with two M12 x 3" Hex Bolts (#28), one Flat Bracket (#14), four Ø 1"
Washers (#34), and two M12 Aircraft Nuts (#36).
C.) Place the end of Right Sliding track (#10) on top of the Upper Cross Brace. Secure it with
two M12 x 3" Hex Bolts (#28), one Flat Bracket (#14), four Ø 1" Washers (#34), and two
M12 Aircraft Nuts (#36).
D.) Attach the end of Left Sliding Track (#9) to the bottom of Upper Cross Brace. Secure it with
two M12 x 3" Hex Bolts (#28), one Flat Bracket (#14), four Ø 1" Washers (#34), and two
M12 Aircraft Nuts (#36).
E.) Securely tighten all Nuts and Bolts previously installed.
F.) Pull the Sliding Carriage (#13) to the end of the Right Sliding Track as slide starting position.
G.) Use the Sliding Carriage Lock Knob to lock the Sliding Carriage when not in use.
H.) Pull and turn the Lock Knob out when ready to use the Sliding Carriage. Use the Rope to
pull the Sliding Carriage back to starting position.
11