Impex MB-2000 Owner's Manual page 8

Step 2 (See Diagram 2)
A.) Connect Upright Post-2 (#2) and Upright Post-4 (#4) with a Lower Cross Brace (#5) in the
mid-span. Secure each end with two M12 x 4 1/8" Hex Bolts (#27), one Curved Bracket
(#15), four Ø 1" Curved Washers (#35), and two M12 Aircraft Nuts (#36).
B.) Connect Upright Post-2 (#2) and Upright Post-4 (#4) with an Upper Cross Brace (#6) on the
top. Secure each end with two M12 x 4 1/8" Hex Bolts (#27), one Curved Bracket (#15), four
Ø 1" Curved Washers (#35), and two M12 Aircraft Nuts (#36).
7
DIAGRAM 2