ASSEMBLY INSTRUCTION
Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches
NOTE: It is strongly recommended that two or more people assemble this machine to avoid
possible injury.
STEP 1
(See Diagram 1)
A.) Do not tighten Nuts and Bolts until instructed to do so.
B.) Connect the Left and Right Base Frame (#1 & #2) with the Stabilizer (#3). Secure each end of
Stabilizer with two M10 x 2 ½" Allen Bolts (#24), one 4 ¾" x 1 ¾" Bracket (#12), four Ø ¾"
Washers (#32), and two M10 Aircraft Nuts (#36).
5
DIAGRAM 1