Table of Contents
Advertisement
ASSEMBLY INSTRUCTION
Tool Required for Assembling the Machine: #5 Allen Wrench
NOTE: It is strongly recommended that two or more people assemble this machine to avoid
possible injury.
STEP 1
(See Diagram 1)
A.) Do not tighten Bolts until instructed to do so.
B.) Attach the two Stabilizer Tubes (#11) to the two Hammock Base Frames (#4).
C.) Secure each end of the Stabilizer Tube to the Hammock Base Frame with two M8 x 5/8" Allen
Bolt (#24) and two Cap Washers (#2).
D.) NOTE: The outer lip of the Cap Washer needs to face away from frame so the head of the
Bolt could be in the recess of the Washer. The groove inside the Cap Cover shold clip onto
the lip of the Cap Washer.
5
DIAGRAM 1
Advertisement
Table of Contents
