Table of Contents
Advertisement
Step 2 (See Diagram 2)
A.) Do not tighten Bolts until instructed to do so.
B.) Insert a Hammock Body Support Tube (#12) through the sleeve next to the pillow on
Hammock Body (#15). NOTE: The pillow needs to be on top of the Hammock Body.
C.) Insert the Right Long Support (#6) into the right opening on the Hammock Base Frame (#4).
D.) Attach right end of the Hammock Body Support Tube to the Right Long Support Frame.
Attach the left end to the Left Long Support (#5).
E.) Insert the Left Long Support into the left opening on the Hammock Base Frame.
F.) Secure the Left and Right Support to the Hammock Base Frame with two M8 x 5/8" Allen
Bolts (#24) and two Cap Washer (#2) on each side.
6
DIAGRAM 2
Advertisement
Table of Contents
