Important Safety Notices - Impex GD-600 Owner's Manual

Rocking hammock
Table of Contents

Advertisement

Please read the entire manual before assembling or operating the equipment. In
particular, note the following safety precautions to reduce the likelihood of injury.
1. Children must be supervised at all times and never left unattended with the unit.
2. Make sure the surfaces are free of objects that may cause tipping over.
3. Place the equipment on level ground, not less than 6 ft (1.8 m) from any structure or
obstruction such as fence, garage, house, overhanging branches, laundry lines, or
electrical wires.
4. Make sure bystanders are at least 5 feet away from the equipment while it is in motion.
No one should be allowed to walk close to, in front of, behind, or between moving
items.
5. Do not stand on the Rocking Hammock. This could cause the bed to tip over and result
in injury.
6. The Rocking Hammock is not designed to use by children.
7. Maximum user weight is 300 lbs.
8. Only one person should be using the Rocking Hammock at a time.
Care and Maintenance
1. Periodically inspect all parts. Check all bolts twice monthly during the usage season for
tightness and tighten as required. It is particularly important that this procedure be
followed at the beginning of each season.
2. Replace any worn and damaged part immediately. Check all coverings for bolts and
sharp edges twice monthly during usage season to be certain they are in place.
Replace when necessary. It is especially important to do this at the beginning of each
new season.
3. Use mild household spray cleaners and/or a damp rag to wipe clean. Do not use harsh
cleaning chemicals.
4. Sand rusted areas on tubular members and repaint using a non-lead based paint
meeting the requirements of Title 16 CFR Part 1303.
5. Disposal Instructions – The equipment can be safely disassembled and disposed
without unreasonable hazards. Call your local recycle agency regarding details of
recycling.
6. Inspect before and periodically during use for frayed ropes and torn seam. Call the
customer service department if any defects were found.
7. Inspect before and periodically during use for excessive rust, integrity of the welds, and
twist in hanging hardware. Call the customer service department if any defects were
found.
SAVE THESE INSTRUCTIONS.
IMPORTANT SAFETY NOTICE
2

Advertisement

Table of Contents
loading

Table of Contents