Follett HCC1400A Operation And Service Manual page 22

18. Using a wrench, rotate the shaft clockwise to align
the keyways in the gear housing and the shaft so as
to accept the key.
19. Insert the key into the keyway.
20. Remove bolt and reinstall the washer and bolt.
Place retainer over bolt and secure with nut and
washer.
21. Lubricate body of stream divider with petrol-gel
and reinstall.
22. Plug gearmotor power cord into electrical box.
Fig. 24
Fig. 25
Fig. 26
22
Apply
petrol-gel