Mark Key; Goto Key; Zoom (+/-) Key; Exit Key - Humminbird 363 Operation Manual

531448-1_A - 363_Man_Eng.qxd 11/9/2005

MARK Key

Press the MARK key while in any view to mark the position of a waypoint,
either at the current boat location, or, if the Cursor is active, at the current
Cursor location.

GOTO Key

If the Cursor is active, pressing the GOTO key while in any view creates a
waypoint and starts navigation towards that waypoint. If the Cursor is
not active, pressing the GOTO key displays the list of waypoints, so that
you can select the waypoint towards which you want to navigate.

ZOOM (+/-) Key

Press the - or + ZOOM keys while in any of the Navigation Views or
the Sonar Zoom View to change the scale of the view to appear
closer or farther away.

EXIT Key

The EXIT key has multiple functions, depending on the situation:
• If an alarm is sounding, pressing EXIT will cancel the alarm.
• If a menu tab is selected, pressing EXIT will exit the menu mode and return
to the view.
• If a menu is active, pressing EXIT will return to the previous level in the
menu system.
• Pressing EXIT will cycle through the available views in reverse order.
• If Freeze Frame is active, pressing EXIT will return to a scrolling display.
• If the Cursor is active, pressing EXIT will remove the cursor from the display.
6:07 PM Page 34
27

Powering Up the Unit

Turn on your 300 Series
the POWER/LIGHT key. The Title screen is displayed
until the 300 Series
363
operation. Your 300 Series
begin Normal or Simulator operation, depending on
the presence or absence of a transducer.
363 Title Screen

The Menu System

The menu system is divided into easy-to-use menu modules. The main components of
the menu system are:
Start-Up Options Menu - Press the MENU key during the power up sequence to view the
Start-Up Options menu.
X-Press TM Menu - The X-Press
the settings that are changed frequently without having to
navigate through the whole menu system. Press the MENU
key once to display the X-Press
menu item from the X-Press
leaving only the menu choice on the screen. Use the Up or
Down Cursor keys to reactivate the X-Press
NOTE: The X-Press TM Menu choices will vary depending on which
X-Press TM Menu
view is active when you press the MENU key, as well as whether
you are in Normal or Advanced User Mode. Either the Sonar or
Navigation X-Press TM
you are in.
Main Menu Tabs - Less frequently-adjusted menus are grouped into the Main Menu
System. The Main Menu system is organized under the following tab headings to
help you find a specific menu item quickly: Alarms, Sonar, Navigation, Chart, Setup,
and Views.
28
TM Fishing System by pressing
TM Fishing System begins
TM Fishing System will
TM menu allows you to access
TM Menu. When you select a
TM menu, the menu will collapse,
TM menu.
Menu will appear, depending on the view