Navigate To A Waypoint Or Position; Add A Waypoint Target Or Trolling Grid - Humminbird 363 Operation Manual

531448-1_A - 363_Man_Eng.qxd 11/9/2005
To make it easier to select a waypoint, select Sort By and press the RIGHT or LEFT Cursor
keys to select a sort order:
• Name shows the waypoints alphabetically
• Time shows the most recently-created waypoint first
• Distance shows the closest waypoint first.
Delete a waypoint: From the Waypoints submenu, select Delete and press the RIGHT
Cursor key to display a list of waypoints. Select the waypoint you want to delete, then
press the RIGHT Cursor key. You will be asked to confirm deletion before the waypoint
is actually deleted.

Navigate to a Waypoint or Position

Navigate to the cursor position: From the Chart or Combo view, use the Cursor key to
select a position or waypoint to which you want to navigate. Press the GOTO key.
Navigation will begin immediately.
Navigate to a specified waypoint: Press the GOTO key, then choose the waypoint to
which you would like to navigate from the waypoint list and press the RIGHT Cursor key
to select it.
NOTE: By repeating the previous instructions, you can add more waypoints to create a longer
multi-segment route.
Skipping a waypoint: From the Navigation X-Press
and press the RIGHT Cursor key. If there is not another waypoint to skip to, navigation
will be cancelled.
Cancel navigation: From the Navigation X-Press
press the RIGHT Cursor key. Canceling navigation removes the route and any waypoints
created using the GOTO key, but does not remove any saved routes from memory. You
will be prompted to save the current route when you cancel navigation.
6:07 PM Page 28
TM
menu, select Skip Next Waypoint
TM menu, select Cancel Navigation and
21

Add a Waypoint Target or Trolling Grid

Waypoint Target Add or Remove a Waypoint Target: From the
Waypoints submenu, select Target and press the
RIGHT Cursor key to display a list of waypoints.
Select the waypoint you want to target. A target
consisting of concentric circles centered on the
selected waypoint will appear on all of the
navigation views; the target shows various distance
ranges from the targeted waypoint. To remove the
target, choose Remove Target from the Navigation X-
Chart View with Target
Press TM menu.
Add or Remove a Trolling Grid: From the Waypoints
submenu, select Grid and press the RIGHT Cursor key
to display a list of waypoints. Select the waypoint to
which you want to add the grid. The trolling grid will
Waypoint
appear on all of the navigation views, and can be
Trolling
Grid
used as a guide when trolling around a waypoint.
The grid can be rotated to any desired heading using
Grid Rotation from the Navigation Main menu. To
remove the trolling grid, choose Remove Grid from
the Navigation X-Press
Chart View with Grid
NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target
or a grid to a new waypoint, the original waypoint will lose its target or grid.
NOTE: The spacing of the rings on the waypoint target and the spacing of the grid lines on
the trolling grid is the same as the length of the scale bar on the left edge of the display.
Zooming in or out will decrease or increase the spacing, respectively.
22
TM menu.