Speed Calibration; Local Time Zone; Daylight Saving Time; Position Format - Humminbird 363 Operation Manual

531448-1_A - 363_Man_Eng.qxd 11/9/2005

Speed Calibration

(Advanced, with Temp/Speed only)
Speed Calibration will adjust the speed readout by the percentage entered, and will
appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel
has moved at least once, when the unit is in Advanced User Mode (see Setup Menu
Tab: User Mode.)
To change the Speed Calibration setting:
1. Make sure you are in Advanced User Mode, then highlight Speed Calibration on
the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Speed
Calibration setting. (-20% to +20%, Default = 0%)

Local Time Zone

(Advanced)
Local Time Zone selects your time zone in reference to the time reported by the GPS
receiver when Time+Date is selected as a Digital Readout on the Sonar View (see Select
Readouts). This menu choice is available only when in Advanced User Mode (see Setup
Menu Tab: User Mode).
To change the Local Time Zone:
1. Make sure you are in Advanced User Mode, then highlight Local Time Zone on
the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Local Time Zone
(Default = EST [UTC-5] - Eastern Standard Time).
6:07 PM Page 88
81

Daylight Saving Time

(Advanced)
Daylight Saving Time adjusts the time display to account for local Daylight Saving Time
when Time+Date is selected as a Digital Readout on the Sonar View (see Select
Readouts). Selecting On adds one hour to the time display adjusted for your local
time zone. Selecting Off leaves the time display as adjusted for your local time
zone. This menu choice is available only when in Advanced User Mode (see Setup
Menu Tab: User Mode).
To change the Daylight Saving Time setting:
1. Make sure you are in Advanced User Mode, then highlight Daylight Saving
Time on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Daylight Saving Time
On or Off. (Off, On, Default = Off)

Position Format

(Advanced)
Position Format selects the format of the latitude and longitude position display.
This menu choice is available only when in Advanced User Mode (see Setup Menu
Tab: User Mode).
To change the Position Format setting:
1. Make sure you are in Advanced User Mode, then highlight Position Format on
the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Position
Format. (dd.ddddd°, dd°mm.mmm', or dd°mm'ss", Default = dd°mm.mmm')
82