Maintenance And Servicing; Troubleshooting - Chicago Electric 66182 Set Up And Operating Instructions Manual

mAINTENANcE AND
SErVIcINg
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
FrOm AccIDENTAl
OpErATION:
Turn the power Switch (19) of
the Hot Knife to its "OFF"
position and unplug the tool
from its electrical Outlet
before performing any
inspection, maintenance, or
cleaning procedures.
problem
Hot Knife will not turn on.
Hot Knife turns on, but does not
heat up.
Hot Knife does not maintain pre-
selected heat temperature during
operation.
Follow all safety precautions whenever diagnosing or servicing the Hot
Knife. Disconnect power supply before servicing.
SKU 66182
TO prEVENT
SErIOUS INJUrY

TrOUBlESHOOTINg

possible cause
1. No power at electrical outlet.
2. Power Switch not pressed.
1. Temperature on Selector
Knob not selected.
1. Power Switch not pressed
and held.
For technical questions, please call 1-800-444-3353.
TO prEVENT SErIOUS
INJUrY FrOm TOOl
FAIlUrE:
Do not use damaged
equipment. If abnormal noise
or vibration occurs, have the
problem corrected before
further use.
1. BEFORE EACH USE, inspect the
general condition of the Hot Knife.
Check for loose screws, misalignment
or binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
2. AFTER USE,
of the tool with clean cloth.
3. WArNINg! If the Power Cord (21)
of this power tool is damaged, it must
be replaced only by a qualified ser-
vice technician.
1. Check power at outlet.
2. Press and hold Power Switch.
1. Turn the Temperature
Selector Knob to the desired
temperature setting.
1. Press and hold Power Switch
throughout operation.
clean external surfaces
possible Solution
Page 9