1500W electric Heat gun Model 66001 Set up and Operating inStructiOnS ® distributed exclusively by Harbor Freight tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com read this material before using this product. Failure to do so can result in serious injury.
Unmodified plugs and matching hazardous situation which, if outlets will reduce risk of electric not avoided, could result in shock. minor or moderate injury. SKU 66001 For technical questions, please call 1-800-444-3353. Page 2...
Page 3
Maintain power tools. check or hearing protection used for for misalignment or binding of SKU 66001 For technical questions, please call 1-800-444-3353. Page 3...
Remove or cover any carpets, rugs, in a back-and-forth motion. Lingering furniture, clothing, cooking utensils or pausing in one spot could ignite and air ducts. the panel or the material behind it. SKU 66001 For technical questions, please call 1-800-444-3353. Page 4...
Page 5
Do not touch the tube of the heating element or the Nozzle when they Clean up all removed paint and are hot. They will be hot enough dust by wet mopping the floors. SKU 66001 For technical questions, please call 1-800-444-3353. Page 5...
Page 6
• Any power cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock. Some dust created by power sanding, sawing, grinding, drilling, SKU 66001 For technical questions, please call 1-800-444-3353. Page 6...
5.1 – 7.0 7.1 – 12.0 12.1 – 16.0 16.1 – 20.0 * Based on limiting the line taBle a voltage drop to five volts at 150% of the rated amperes. SKU 66001 For technical questions, please call 1-800-444-3353. Page 8...
PVC and Work piece and Work area Set up linoleum, PVC-coated fabric, Designate a work area that is clean wallpaper, tarpaulins and foils. and well-lit. The work area must not SKU 66001 For technical questions, please call 1-800-444-3353. Page 9...
Page 10
“POWER” button to turn the unit off and allow the Heat Gun to cool down on a insulate, non-flammable surface. Disconnect its power supply after use. Clean, then store the tool indoors out of children’s reach. SKU 66001 For technical questions, please call 1-800-444-3353. Page 10...
No power at outlet. Check power at outlet. Cord not connected. Check that cord is plugged in. Unsatisfactory results. Improper heat setting. Adjust heat setting (“l” or “ll”) for correct application. SKU 66001 For technical questions, please call 1-800-444-3353. Page 11...
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 66001 For technical questions, please call 1-800-444-3353. Page 12...