Table of Contents
Advertisement
50 FT. DRAIN CLEANER
ASSEMBLY AND OPERATING INSTRUCTIONS
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
2008 by Harbor Freight Tools
©
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may
differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09b, 09k
WITH POWER FEED
Visit our website at: http://www.harborfreight.com
. All rights reserved. No portion of this manual or any artwork contained
®
66508
Advertisement
Table of Contents
Related Manuals for Chicago Electric 66508
Summary of Contents for Chicago Electric 66508
- Page 1 50 FT. DRAIN CLEANER WITH POWER FEED 66508 ASSEMBLY AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. Copyright 2008 by Harbor Freight Tools .
-
Page 2: Specifications
Do not operate power tools in ex- a polarized outlet. Do not change the plosive atmospheres, such as in plug in any way. Double insulation REV 09b, 09k SKU 66508 Page 2 For technical questions, please call 1-800-444-3353... -
Page 3: Personal Safety
Accessories that may be a rotating part of the power tool may suitable for one tool may become haz- result in personal injury. ardous when used on another tool. SKU 66508 Page 3 For technical questions, please call 1-800-444-3353... -
Page 4: Specific Safety Rules
Keep the work area well lit. Make sure there is adequate surround- Position Drain Cleaner within two ing workspace. Always keep the work feet of drain opening. Greater dis- SKU 66508 Page 4 For technical questions, please call 1-800-444-3353... -
Page 5: Grounded Tools: Tools With Three Prong Plugs
• Properly maintain and inspect all tools provides a low resistance path to carry before use to avoid electrical shock. electricity away from the user, reducing the risk of electric shock. (See 3-Prong Plug and Outlet.) SKU 66508 Page 5 For technical questions, please call 1-800-444-3353... -
Page 6: Double Insulated Tools: Tools With Two Prong Plugs
As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using exten- sion cords with inadequately sized wire causes a serious drop in voltage, SKU 66508 Page 6 For technical questions, please call 1-800-444-3353... - Page 7 Parts List at the end of this manual. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. SKU 66508 Page 7 For technical questions, please call 1-800-444-3353...
-
Page 8: Operating Instructions
Star Knob (44-13). See photo on page 10, top-right. The Star Knob (44-13) must be loosened before changing the position of the Direction Lever (44-16), and then retightened after the adjustment. REV 09b SKU 66508 Page 8 For technical questions, please call 1-800-444-3353... - Page 9 Auger Bulb (60). Once the drainpipe is opened, then use the 1-1/2 U-Cutter (61) or 1-1/4” Side Cutter Blade (62) to scrape the inside wall of the drain pipe, for a more REV 09b SKU 66508 Page 9 For technical questions, please call 1-800-444-3353...
- Page 10 Caution: Avoid damage to Cable or cutting tool. Do not use the Motor Direction Switch (5) in the Reverse position to pull the Cable out of the drain pipe. Always leave the REV 09b SKU 66508 Page 10 For technical questions, please call 1-800-444-3353...
-
Page 11: Troubleshooting
Motor running in reverse. Retract Cable with the Motor Di- rection Switch (5) in the Forward position. Distributor tube frozen. Lubricate distributor tube bear- ings. SKU 66508 Page 11 For technical questions, please call 1-800-444-3353... - Page 12 Feed roller frozen. Clean and lubricated feed rollers. Replace worn roll- ers. Cable worn out. When cable coils wear flat, cable should be replaced. SKU 66508 Page 12 For technical questions, please call 1-800-444-3353...
-
Page 13: Inspection, Maintenance, And Cleaning
Remove the four bolts that hold the End Cap (44-7A) and Guide Rollers (44-9) to the Case (44-11A). Slide the End Cap out of the Case and inspect and clean the three guide rollers as described above. SKU 66508 Page 13 For technical questions, please call 1-800-444-3353... -
Page 14: Please Read The Following Carefully
BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. REV 09b SKU 66508 Page 14 For technical questions, please call 1-800-444-3353... -
Page 15: Main Unit Parts List
41 Hex Bolt M8 x 20 81 Inner Hex Screw M4X12 NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as re- placement parts. REV 09b SKU 66508 Page 15 For technical questions, please call 1-800-444-3353... - Page 16 MAIN UNIT ASSEMBLY DRAWING SKU 66508 Page 16 For technical questions, please call 1-800-444-3353...
- Page 17 44-26 Spring Washer Ø6 44-12ASide Cap 44-29 O-ring 44-13 Star Knob M12 44-30 Washer Ø8 44-14AShaft 44-31 Pin 3X10 44-15 Shaft Sleeve 44-32 Flat Washer 6 SUBASSEMBLY NO. 44A (FEED UNIT) SKU 66508 Page 17 For technical questions, please call 1-800-444-3353...
-
Page 18: Limited 90-Day Warranty
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 66508 Page 18 For technical questions, please call 1-800-444-3353...