Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19l
Advertisement
Related Manuals for Chicago Electric 61737
Summary of Contents for Chicago Electric 61737
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 61737... -
Page 3: Safety
Trigger is dangerous and must be repaired. with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Item 61737 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 Turn off the tool, and unplug it from its electrical outlet before leaving. 10. This product is not a toy. Keep it out of reach of children. Page 4 For technical questions, please call 1-888-866-5797. Item 61737...
- Page 5 If any abnormal as tingling, numbness, and white or blue fingers), vibration occurs, stop use immediately. seek medical advice as soon as possible. SaVE tHESE inStructiOnS. Item 61737 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-prong plug.) Outlets for 2-prong plug Page 6 For technical questions, please call 1-888-866-5797. Item 61737...
- Page 7 Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning n 0 xxxx/min. No Load Revolutions per Minute (RPM) Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 61737 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Specifications
For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 14. Functions power Switch port power cord Guide upper Blade Lower Blade Figure a Page 8 For technical questions, please call 1-888-866-5797. Item 61737... -
Page 9: Operation
The power cord must reach the work area with enough extra length to allow free movement while working. Item 61737 For technical questions, please call 1-888-866-5797. Page 9... - Page 10 6. To prevent accidents, turn off the tool and unplug it after use. Clean, then store the tool indoors out of children’s reach. area above upper Blade Figure D Page 10 For technical questions, please call 1-888-866-5797. Item 61737...
-
Page 11: Maintenance
• any other condition that may affect its safe operation. Sharpening Blades When sharpening the Blades, maintain upper Blade Lower Blade upper Blade original angles. (See Figure E.) 12° 8° 4° Figure E Item 61737 For technical questions, please call 1-888-866-5797. Page 11... - Page 12 Socket WarninG! if the supply cord of this Screw power tool is damaged, it must be replaced only by a qualified service technician. Lower Socket Screw (not shown) Page 12 For technical questions, please call 1-888-866-5797. Item 61737...
- Page 13 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Item 61737 For technical questions, please call 1-888-866-5797. Page 13...
-
Page 14: Parts List And Diagram
Ball Bearing (6201) Power Cord Holder Circlip (932) Motor Cover Bearing Power Cord Gear Hex Key (not shown) Circlip (10) 18 19 20 21 22 26 27 31 32 33 34 Page 14 For technical questions, please call 1-888-866-5797. Item 61737... - Page 15 Strain Relief Needle Bearing Cover Plate Eccentric Shaft Power Cord Sleeve Straight Key (4x8) Housing Ball Bearing (6201) Screw Circlip (932) Power Cord with Plug Bearing Hex Key (not shown) Gear Item 61737 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.