Heath Zenith Motion Sensing 3-Way Wall Switch 6107 Owner's Manual page 3

See pages 4 through 6 for detailed instructions for installing and
wiring the 6107 Wall Switch.
FROM
POWER
SOURCE
FROM
POWER
SOURCE
WHITE
FROM
POWER
SOURCE
BLACK
*COMMON-Used for illustrative Purposes Only. Check Your Switch. The common may be in a different loca-
tion, depending on the brand of your switch.
RED is used to represent the second wire between two standard three-way switches. This may not be the color
used in all installation. If you are not sure about your wiring, call an electrician for installation help. There is also
a RED wire on the 6107 switch. Check the instructions above closely and do not confuse the two.
595-4514-16
ONE 6107 SWITCH IN CIRCUIT
WHITE
*COMMON
BLACK
6107 SWITCH 1
WHITE
BLACK BLACK
OFF ON
AUTO
6107
6107 SWITCH 2
WHITE
ADD JUMPER WIRE
*COMMON
RED
(In Wall)
BLACK
EXISTING
3-WAY SWITCH
WHITE WHITE
*COMMON
RED
(In Wall)
BLACK
IN CIRCUIT
ST
WHITE
ADD JUMPER WIRE
*COMMON
BROWN RED
(In Wall)
RED BLACK
(From 6107)
EXISTING
3-WAY SWITCH
IN CIRCUIT
ND
BROWN
OFF AUTO ON
RED
(From 6107)
-3-
inStallation
BLACK
WHITE
BLACK
WHITE
BLACK
BLACK
6107